Mivan Shuttering Technology

The world has come a long way in terms of new ways to build things that are not only better for the environment but also lower the cost of building by several notches. Mivan Shuttering is one of these technologies that homebuyers need to look into more and more because it has so many benefits. One of the main reasons it is becoming more and more popular is that it is a good way to save money without sacrificing the quality of the building.

Let’s talk about the benefits of a building made with the Mivan Shuttering technology instead of the usual way of building.

Contents

01. Pros of Mivan Shuttering Down

02. Cons of Mivan Shuttering Down

03. Understanding Mivan Shuttering

• What Exactly is Formwork?
• Mivan's Shuttering Process

This type of formwork has a lot of advantages over traditional formwork, which is why it is the most popular choice in the building industry:

• Mivan shuttering doesn’t need highly skilled workers because the parts are made ahead of time. This cuts down on the cost of labor on-site.
• A lot of the work has already been done off-site, so the building goes up quickly.
• The panels on the walls and ceiling are made of high-quality concrete, so they don’t need a lot of upkeep.
• Because the prefabricated parts are all the same, the slabs and walls have a smooth finish that doesn’t need plastering.
• With Mivan technology, walls are made to be thinner, which allows for higher carpet areas.
• The pre-made panels are easy to take apart and move around because they are held together with a simple pin and wedge system.
• About 250 times, the same formwork can be used again. It can also be recycled to make other building materials.
• Most of the time, buildings made with Mivan shuttering can handle earthquakes better than other kinds of buildings.

• Even though Mivan shuttering has a lot of benefits that make it the construction method of choice for industry leaders, it does have a few small flaws, just like everything else. Some of the problems with this method are:
• Aluminum formwork is more expensive than traditional formwork, so it is not cost-effective to buy it at first for Mivan shuttering.
• It needs to be planned and built in a uniform way. To save money, the structure needs to be symmetrical.
• Since the pieces of the formwork are close together and not very thick, it is not possible to make changes to the building without breaking it.
• After the concrete is poured into the formwork, the heat of hydration, which is the heat made when the cement and water mix, is very high because of the shear walls. When it gets very hot, concrete can crack and sometimes even explode.
• The wall ties need space between the formwork and the wall, which could let water in during the monsoons.

Mivan shuttering is a way of building that uses formwork, which is a structure made to support concrete until it can stand on its own. Let’s talk about what formwork means.

Formwork is a temporary structure that holds and supports fresh concrete until it is strong enough to hold its own weight. The concrete is poured into a mold so that the engineer can give it the shape, size, and position he or she wants. Population growth and a lack of space led to the need for vertical growth, which led to the first high-rise buildings.

The type of formwork used in a high-rise building project is the most important thing that affects the cost, quality, and speed of the building. Over the years, formwork technology has changed to use smaller support units, lighter metals and plastics, and more cost-effective ways to use materials. Wood, steel rebar, plastics, and aluminum are some of the different things that are used for formwork.

Mivan shuttering is the newest development in formwork technology. It is a good fit for the Indian construction industry, which needs to keep up with the growth of both population and demand by building new homes and businesses.

Mivan shuttering is a type of aluminium formwork that was first made by an organisation in Europe. In 1990, the Malaysian company Mivan Company Ltd. began making these formworks. Because of this, this way of building was called “Mivan technology.” The Mivan formwork has a long history of being cost-effective and good for the overall strength of the structure being built. The steps in the process of closing down Mivan are as follows:

Setting up the wall rebar – The basic structure of the building is made from welded wire mesh called reinforced steel or wall rebar. The reinforced steel holds up the concrete until it has reached a strength of 50%. Steel is protected from corrosion by fusing with concrete, and the depth of the concrete cover is crucial.

Putting the aluminium formwork in place – The aluminium mould comes from the factory already made to the right size for slabs, columns, beams, stairs, and other building parts. The formwork is easy to set up on-site because it uses a simple pin and wedge system. This system makes it easy to take apart the formwork once it has done its job.

Pouring the concrete – Finally, the concrete is poured into the formwork in layers so that it can set. This makes sure that there isn’t much chance of bulging and that the shape and size stay the same. Concrete pressure on either side of the rebar wall is self-balanced by means of horizontal pieces called wales that are tied together with bolts that run through the wall.